E-cigarettes were first made in China and introduced in 2007 to the United States. They have since become increasingly popular. Vaporizers have been modified since then with the modern advancements in technology. The first designs were not as sophisticated as the current models. They were not easily available as most of the manufacturing of the e-liquid and hardware happened in China. Many vendors did not have them until in later years when the market broadened and most vendors had them.
The first vaping designs were simple and the hardware included the atomizer, the cartridge, and the battery. This was poor quality vaping hence the need for modifications that were done over time. To date, there are advanced designs that are great depending on your preference. You can check out Kanger Toptank Mini for to get the best vaping experience.
Here are the 4 most important pieces of hardware in vaping history:
This component makes the vaporizer work. The reason why the cigarette is called an e-cigarette is the electric current from the e-cigarette. Manually pressing a button or simply inhaling the e-liquid activates the battery. There is a light emitting diode (LED) that will notify you when the battery is on. You need to know how to use a vaporizer before using it due to some occurrences of vape explosions. The first vaporizers had batteries with a short life but that has changed, battery sizes have been increased to last longer. There are many battery charges on the market today.
The atomizer is the device responsible for vaporizing the e-liquid by heating it and is attached to the battery. When the e-liquid is too hot, the vapor is released. Atomizers usually work along with a coil. The first atomizers had a bridge in form of a stainless steel mesh transferred e-liquid to the coil. They were basic hence, they produced vapor in low quantities. Atomizers have developed through time into cartomizers, clearomizers, rebuildable atomizers (RBAs), rebuildable dripping atomizers (RDAs), and rebuildable tank atomizers (RTAs). These design inventions allow for a better vaping experience making refills easier.
The atomizer transfers the e-liquid through the wick to the coil to be heated up for vapor production. The coil is essential for your vaping experience. The first designs were light and located at the bottom of the vaporizer. They produced poor quality vapor and burnt out easily. Today, the wires used for coils are made from heat-resistant materials like nickel that fluctuate in their temperatures thereby providing temperature control to the vaporizer providing you will a long-lasting coil and avoiding explosions.
This is where your e-liquid is stored. The atomizer heats the e-liquid in the cartridge. In the beginning, cartridges had a small capacity to hold the e-liquid and when it was over you could not easily refill it due to the scarcity of e-liquid. The best option was to buy a pre-filled cartridge. The cartridge’s absorbent material would easily be worn out which would lead to poor performance. Today, there are tanks that hold the liquid, which gives you a better vaping experience due to their high capacity and efficiency.
In conclusion, vaping has greatly evolved over the years and right now, there are varieties of vaporizers in the market that will give you that quality vape. Choose quality vaporizers by researching on the best models in the market before settling on one. The most important tip is that you do not need just to buy a model because it is sophisticated but because you know how to use it.
Latest posts by Martin B. (see all)
- What Is the Best Wick Material for Vaping? - February 12, 2019
- The Problem With Pre-Filled Vape Cartridges And The Wax Liquidizer Solution - February 5, 2019
- Why do coils burn out? and how to care for your coils - February 5, 2019